Vacuum table SL series>
Vacuum tables of the SL series are made of 100% tempered, face-milled cast aluminium EN AW-5083 here in Germany. This series is characterised by a low construction height of only 11mm (Z-axis clearance) and a favourable price and is particularly interesting for clamping larger surfaces. Due to the design with a screwed-on vacuum connection, it is possible to convey large volume flows through the vacuum table despite the low thickness. The suction surface has a hole matrix of 20x20mm, with 0.6mm holes. The surface is therefore also suitable for clamping paper and films. A 20mm hole matrix has no disadvantages in practical use compared to a 10mm hole matrix. The only exception are very small workpieces, e.g. smaller than 100x50mm. If you don“t find the desired dimension for your machine among our standard, please do not hesitate to contact us. We will be happy to offer you an individual solution at a fair price.
Technical data:
- from a Clamping area  of 600x400mm
- Material: EN AW 5083, thermally relaxed, face milled
- Hole matrix 20mm / 0.6mm holes
- Suitable for clamping papers and foils
- Is fixed to the ground with M6 Countersunk bolts
- By mounting on a T-Slot bed 50mm slot distance
Scope of delivery:
- Vacuum table  SL-series
- 1 x clamping fleece
- 1 set of Cover rubber mat
- 1 x hose clamp